<div dir="ltr"><div>TL;DR: PR-655 freezes when connected to any Mac but works fine with Windows</div><div><br></div><div><br></div><div>I have a Photo Research PR-655 that was purchased in 2012. For about 8 years I ran it mostly from a Mac to measure luminance curves of projectors and displays. A few years ago it stopped working with any of my Macs--the behavior I observe is that w<b>hen I plug the USB cable from the PR-655 to the Mac, the PR-655 freezes up</b> (sometimes instantly, sometimes after a minute or two). Both the PR-655 display and the ability to put it into remote mode and take remote readings stops working. I sent the unit back to PR for repair and calibration and they said the unit is working normally. It works fine when I connect it to Windows computers, and PR said they test them only with Windows and couldn't help me debug this issue with the Mac.<br></div><div><br></div><div>The most maddening thing is that I have a Mac laptop that I have set up to dual boot into Windows--the PR-655 works fine when the laptop is booted to Windows but has this freezing behavior when booted to Mac--identical USB hardware! I've tried numerous Macs (both old and new, USB-A and USB-C, OS from 10.10 up through the latest). I also tried using a USB current meter in between the PR-655 and the laptop in both OSes but couldn't see any difference.</div><div><br></div><div>I'm wondering if anyone else has encountered this and if you have figured out what the problem is.</div><div><br></div><div>Thanks,</div><div><br></div><div>Andrea</div><div>-----<br>Dr. Andrea Grant, Ultra High Field MRI Manager<br>Center for Magnetic Resonance Research, University of Minnesota<br><a href="mailto:gran0260@umn.edu">gran0260@umn.edu</a><br><a href="http://umn.edu/~gran0260">http://umn.edu/~gran0260</a></div></div>